|
The new Wonderoo V2 is supplied complete unique 3-stage inserts
TM, made from a combination of high tech
fabrics designed for effective performance and swift drying.
Your inserts can be used as follows:
the small, contoured insert is made from three layers
of soft, quick absorbing microterry, ideal for small babies.
the large rectangular
insert is made from six layers of soft, stretchy and fast-absorbing
bamboo terry. This fabric is green to grow and highly absorbent
and trim. The insert opens out for efficient washing and swift
drying. It fastens closed with snaps to make it easy to insert
into the nappy and keep it neatly folded when in use.
1. Lay out the insert as shown in Diagram 1., with
the Wonderoos label face down.
2. Fold the right panel over the centre panel as shown
in Diagram 2.
3. Fold the left panel over the centre and fasten the
snaps on the right hand side.
4. Your large bamboo insert is now ready for use. |
|
Diagram 1.
|
Diagram 2. |
Diagram 3. |
Diagram 4. |
|
|
|
the two inserts can be snapped together to provide super-absorbency
for older babies, heavy wetters or for night time. There are
two (coloured) snap positions, enabling you to put the booster/small
insert where it is most required for your child.
Put the insert into the nappy though the opening at the back,
ensuring it lies flat and is entirely enclosed inside the pocket.
Store and wash your inserts with the Wonderoo V2 shells/outers.
Hold the nappy over the bucket or bag and allow the inserts
to drop out. Unsnap the small and large inserts and undo the
poppers on the large ones so that they will open out in the
wash.
Hang your inserts on an airer or line in a warm place and they
will hang to dry overnight. The large inserts will dry quicker
if they are not doubled over themselves, so peg them up rather
than drape them over the line or airer for fastest drying times.
Back to Wonderoo
V2 main page.
|
