Swaddlebees Fleece Nappy Covers / Wraps

A very comfortable nappy cover made from one layer of 200 wt. Malden Mills fleece with an additional layer in the wet zone. Fleece repels liquid, preventing wetness from coming through from the nappy to clothing, but is extremely breathable and allows evaporation, helping to keeps baby's skin comfortable and cool.

Swaddlebees nappy covers are designed to give a clean, trim and stretchy fit. They are perfect for use over trim-cut shaped nappies such as Swaddlebees organic cotton velour nappies and organic cotton velour pocketted nappies, and are suitable for use over prefolded nappies. However, this wrap is stretchy enough to cover most shaped nappies.

Step 1:  Lay baby on top of wrap.  Pull the front of the wrap towards you.		Step 2:  Pull the wrap over the front of the fitted diaper.
Step 3: Bring one of the back wings over to close one side		Step 4:  Close the other side and make sure the wrap covers the entire diaper underneath.

Sizing and Measurement

*Please do not use weight as the sole basis for choosing the nappy size for your baby. Because babies are shaped differently, a nappy may or may not fit your baby even if he/she is within the weight range for a certain size. The best way to choose your size is to go by measurements.

Wash and care

Wash your fleece covers prior to first use. Your fleece nappy covers can be re-used until soiled or smelly. You can air dry the cover in between uses as you rotate them with another cover or two after each change.

Store your used nappy covers in a dry bucket with a tight-fitting lid or nappy storage bag. Make sure the Aplix tabs are folded back and fixed to the laundry tabs. On wash day wash your covers with a small amount of detergent (1/4 - 1/2 of the recommended dose) at any temperature.

Do not soak or use bleach. This will cause the fabric's fibres to break down. Do not wash with large quanitite of new cotton items (to prevent lint sticking to the fleece)